SATO S84 ex - Hidden Setting Mode; Work Shift Setting Mode

2 Operation and Configuration
27
S84-ex/S86-ex Service Manual
2.2.7 RFID Mode
SERVICE MODE
SETTING
RIBBON TENSION ADJUSTMENT S84-ex 8 dots/mm: 12
12 dots/mm: 5
24 dots/mm: 1
S86-ex 8 dots/mm: 12
12 dots/mm: 5
No
THROUGHPUT NORMAL Yes
FEED OFFSET 000 mm Yes
BACKFEED OFFSET 000 mm Yes
TOTAL QTY DISPLAY NO No
PLUG & PLAY ENABLE No
REGION CODE US No
REPLY PERIOD NORMAL No
ENQ REPLY DELAY TIME 0000 ms No
FONT SELECT
GB18030 YES No
BIG5 YES No
KSX101 YES No
Setting Item Initial Value
Default Setting
(Dot Density Change)
RFID MODULE ENABLE Yes
RFID Freq Band North America Yes
INVENTORY CHECK ENABLE Yes
INVENTORY CHECK TIMEOUT 150ms Yes
Setting Item Initial Value
Default Setting
(Dot Density Change)