SATO S84 ex - RFID User Mode

2 Operation and Configuration
26
S84-ex/S86-ex Service Manual
2.2.6 Service Mode
Setting Item Initial Value
Default Setting
(Dot Density Change)
SERVICE MODE SENSOR LEVEL -
SETTING
AUTO ONLINE FEED NO Yes
FEED ON ERROR NO Yes
FUNCTION KEY NONE No
REPRINT W/FEED NO Yes
CALENDAR REPRINT YES No
FORWARD/BACKFEED
DISTANCE
DEFAULT No
EXT 9PIN SELECT MODE1 No
PREND TYPE 3/4 NORMAL Yes
BACKFEED SPEED FAST Yes
EURO CODE D5 No
SELECT LANGUAGE ENGLISH Yes
PRIORITY SETTING COMMAND No
RIBBON NEAR END ENABLE No
LABEL RE-DETECT ENABLE Yes
SET PASSWORD OFF -
PASSWORD NO. 0000 No
COMPATIBLE MODE OFF No
COMPATIBLE MODE HEAD SIZE NORMAL No
COMPATIBLE MODE DARKNESS ENABLE No
PRINTER MODEL S84-ex: S84/M8459Se
S86-ex: M8485/90/60/65Se
No
MEDIA LENGTH S84-ex 8 dots/mm: 2500 mm
12 dots/mm: 1500 mm
24 dots/mm: 400 mm
S86-ex: 1249 mm
No
TRACE MODE DISABLE No
SAVE PRINT LOG DISABLE No
MEMORY SELECT SD CARD No
CLEAR PRINT LOG NO -
OUTPUT PRINT LOG FROM
SUBPORT
DISABLE No