2 Operation and Configuration
25
S84-ex/S86-ex Service Manual
SET CALENDAR
CALENDAR MONTH CODE JANUARY A
FEBRUARY B
MARCH C
APRIL D
MAY E
JUNE F
JULY G
AUGUST H
SEPTEMBER J
OCTOBER K
NOVEMBER L
DECEMBER M
Yes
CALENDAR CASE FORMAT MIXED Yes
CALENDAR CHECK DISABLE Yes
CHARACTER PITCH PROPORTIONAL Yes
PROTOCOL CODE STANDARD Yes
NON STANDARD CODE SETTING STX=7Bh, ETX=7Dh, ESC=5Eh,
ENQ=40h, CAN=21h, NULL=7Eh,
OFFLINE=5Dh
RIBBON SAVER DISABLE Yes
MODE SELECT SBPL Yes
JOB MODIFICATION DISABLE Yes
ROTATE LABEL DEG: 0 Yes
LABEL SIZE ADJ WIDTH: S84-ex 8 dots/mm: 0832
12 dots/mm: 1248
24 dots/mm: 2496
S86-ex 8 dots/mm: 1340
12 dots/mm: 2010
Yes
LABEL SIZE ADJ HEIGHT: S84-ex 8 dots/mm: 20000
12 dots/mm: 18000
24 dots/mm: 9600
S86-ex 8 dots/mm: 9992
12 dots/mm: 14988
Yes
LCD POWER SAVING 00 MIN Yes
LED INDICATION ON Yes
ERROR INDICATION NONE Yes
Setting Item Initial Value
Default Setting
(Dot Density Change)
To Next Page
Loading...
