SATO S84 ex - History Data Save Mode

2 Operation and Configuration
8
S84-ex/S86-ex Service Manual
2.1.1 History Data Save Mode
This mode allows you to execute saving the printer operation log and received data. The printer
operation log such as the print log, error log and received data can be saved to
an SD card or USB
memory
.
Before executing this mode, make sure that SAVE PRINT LOG in SETTING of SERVICE MODE is set to
ENABLE. Refer to Chapter 4 Operation and Configuration of the S84-ex/S86-ex operator manual for
more details.
The flowchart shows the sequence of the setting screens for the history data save mode. The table
describes each setting screen in detail.
button
button or
select NO +
button
button
button
button
Select NO + button
Shows when SAVE LOG is
set to YES.
Select YES + button
Select YES + button
Finished copying
the history data
Finished saving
the received data
(Press for 5 seconds)
* Press the , , or button to select an item or set the value
accordingly. The active arrow icons are shown on the screen.
* Pressing the button on each screen will revert to the OFFLINE
screen.