2 Operation and Configuration
9
S84-ex/S86-ex Service Manual
SAVE LOG
Select whether or not to save the printer operation log to an SD card or
USB memory.
• YES: Goes to the COPYING... screen for saving the print log.
• NO: Goes to the DATA SAVE START screen for saving the received
data.
Note
Three beeps will sound if you select YES and press
the ENTER button
when the memory is full or
SAVE PRINT LOG in SETTING of SERVICE
MODE is set to DISABLE
.
For details on how to select an SD card or USB memory, refer to
Supplementary explanation on page 11.
COPYING... (LOG)
This screen shows while the printer is copying the print log to an SD card
or USB memory. After that, the printer goes to the SAVE LOG
COMPLETED screen automatically.
Note
Shows only if SAVE LOG is set to YES.
SAVE LOG COMPLETED
This screen shows when copying the print log to an SD card or USB
memory is completed. Press the ENTER button to proceed to the
DATA SAVE START screen.
Note
Shows only if SAVE LOG is set to YES.
To Next Page
Loading...
