2 Operation and Configuration
10
S84-ex/S86-ex Service Manual
DATA SAVE START
Select whether or not to save the received data to an SD card or USB
memory.
• YES: Goes to the COPYING... screen for saving the received data.
• NO: Returns to the OFFLINE screen.
Note
Three beeps will sound if you select YES and press
the ENTER button
when the memory is full.
COPYING... (DATA)
This screen shows while the printer is copying the received data to an SD
card or USB memory. After that, the printer goes to the DATA SAVE
COMPLETED screen automatically.
DATA SAVE COMPLETED
This screen shows when copying the received data to an SD card or USB
memory is completed. Press the ENTER button to return to the
OFFLINE screen.
To Next Page
Loading...
