7 Appendix
115
S84-ex/S86-ex Service Manual
7.2
Download and Upload Mode
The following table shows the download and upload specification using the interface, SD card or USB
memory.
Target Item
SD Card/
USB
Memory
Interface Note
IPL Download
Firmware O X Only SD card
LCD data O X Only SD card, Only English
2 Byte fonts X X -
Emulation loader O X -
Emulation firmware X X -
Configuration X X -
Font/logo X X -
Receive buffer X X -
Status 5 history X X -
Program Download
Firmware O O -
LCD data O O -
2 Byte fonts O O -
Emulation loader O O -
Emulation firmware X X -
Configuration O O -
Font/logo O O Files that are uploaded in the upload mode
are downloaded.
Receive buffer X X -
Status 5 history X X -
All O X All the items with O above are downloaded.
Program Upload
Firmware O X -
LCD data O O -
2 Byte fonts O X -
Emulation loader X X -
Emulation firmware X X -
Configuration O X When “All” is selected, two files (binary
format and text format) are uploaded.
(Normally text format file only)
Font/logo O X -
Receive buffer X X It is possible to upload in the receive data
save mode.
Status 5 history O X -
All O X All the items with O above are uploaded.
To Next Page
Loading...
