SATO S84 ex - List of Initial Values; Normal Mode; User Mode

2 Operation and Configuration
19
S84-ex/S86-ex Service Manual
2.2 List of Initial Values
When you perform the default setting after changing the print head density, some setting items will be
reset to the initial value as shown in the following lists.
2.2.1 Normal Mode
2.2.2 User Mode
Setting Item Initial Value
Default Setting
(Dot Density Change)
ADJUSTMENT MODE
PITCH POSITION Varied No
OFFSET POSITION Varied No
DARKNESS 50 No
VOLUME LEVEL 2 Yes
LCD Brightness Midrange Yes
Setting Item Initial Value
Default Setting
(Dot Density Change)
PRINT SPEED S84-ex 8 dots/mm: 06 IPS
12 dots/mm: 06 IPS
24 dots/mm: 03 IPS
S86-ex 8 dots/mm: 06 IPS
12 dots/mm: 06 IPS
Yes
PRINT DARKNESS 06 Yes
PITCH OFFSET +0.00 mm Yes
CHARACTER CODE UTF-8 Yes
2 BYTE FONTS GB18030 Yes
2 BYTE FONTS MINCHO Yes
NOTIFICATION FUNCTION SETTING NO Yes
NOTICE FUNCTION CLEAN PRINTER Yes
NOTICE FUNCTION DISABLE Yes
CLEAN PRINTER NOTICE DISTANCE 0 m Yes
CHANGE ROLLER NOTICE DISTANCE 0 km Yes
CHANGE HEAD NOTICE DISTANCE 0 km Yes