5 Replacement
95
S84-ex/S86-ex Service Manual
CAUTION
The two torque limiters, and have minor differences. Keep them separately.
6 Replace the defective torque limiter and/or the defective torque limiter .
7 Perform the assembly with the reverse procedure.
Note
A properly installed torque limiter will be oriented so that its metal end is inserted onto the spindle first and will
engage each respective pin. Properly installed ribbon bosses will engage their respective torque limiters.
Rotate each while applying forward pressure to ensure proper nesting.
8 Perform the procedure from steps 3 through 7 to replace the torque limiters of the
ribbon supply spindle.
To Next Page
Loading...
