About the Service Manual
This manual serves as a technical service and maintenance manual for
the ScanMate 4000 and 5000. Its purpose, linked with the technical
training courses provided by ScanView, aim to give the the service
engineer the in-depth knowledge of the function and construction of
the ScanMate 4000 and 5000 and the skills necessary to perform repair
and maintenance operations.
About the ScanMate 4000 and 5000
The ScanMate 4000 and 5000 are single-pass, ultra high resolution
scanners utilizing three PMT sensors. They can scan images up to 222 x
303 mm in both A4 and B4 formats with a scanning resolution for the
4000 model from 50 to 4000 dpi and the 5000 model from 50 to 5000
dpi, which allows for enlarging originals to as much as 1000%.
The ScanMate 5000 is basically identical to the ScanMate 4000 apart
from the addition of an extra drum, (located behind a hinged flap bel-
ow the main drum) and a drum bar code reader.
ScanMate 5000 is found in two variants; earlier model scanners have a
serial number of 0200-xxx and later versions are 0210-xxx.
The differences between the ScanMate 4000 and the two variations of
the 5000 can be seen in the Part Replacement section of this manual.
1 • GENERAL INFORMATION
Edition 1 • January 1996 Service Manual • ScanMate 4000/5000
1•3
ScanMate 4000
ScanMate 5000
To Next Page
Loading...