Service Manual Revision System
Revisions to this manual will show the most recent revision number
and date issued on the bottom of each page. Each section will show the
latest revision of the contents of that section. A master revision list
showing the revision status of each section is shown below
To assist in the identification of which part of the new section has been
revised, a vertical line on the left hand side of the affected page or pages
will define the area of revised text. Additionally, the cover letter sent
with the manual revision will name the revised page or pages.
For ease of reference, Service Manuals will have their own edition num-
ber; a number which will be the number of the latest section edition.
Service Manual • ScanMate 4000/5000 Edition 1 • January 1996
1•4
1 • GENERAL INFORMATION
Revision List
Edition Date
Section 1 • General Information 1 January 1996
Section 2 • Installation 1 January 1996
Section 3 • Service program 1 January 1996
Section 4 • Part replacement 1 January 1996
Section 5 • Adjustments and testing 1 January 1996
Section 6 • Cleaning and maintenance 1 January 1996
Section 7 • Diagrams and layouts 1 January 1996
Section 8 • Trouble shooting 1 January 1996
Section 9 • Not allocated
Section 10 • Parts list and spare parts policy 1 January 1996
To Next Page
Loading...