Schaerer Junior - 4.6.6.8 Change PIN Code

Operation
Page 4-30 BAJR_USA_EN_V03
The coffee machine is set to run in "Ready" mode and use the default settings
for routine operation.
Note:
Programming can be cancelled at any time by pressing the [ on/off ] button. All
settings that have been confirmed so far by pressing the [ M ] button are still va-
lid. The current value shown in the display is discarded and the original setting is
kept.
1. Press the [ M ] button.
2. Press the [ DECAF ] button:
Display example (=factory setting)
3. Enter the PIN code as described in section 4.6.6.1 "Entering PIN code" on page
4-24.
4. Press the [ M ] button until the following menu appears:
Display example (=factory setting)
5. Press the [
] button.
Display example (=factory setting)
6. Input the first digit of the PIN code using either the [
] or [ ] button.
7. Confirm by pressing the [ M ] button.
Display example: 9 has been entered. The cursor will now jump to
the second digit.
8. Repeat steps 6. and 7. for each successive digit until the full PIN code has been
entered.
9. Press the [ M ] button to confirm the setting or modification.
10. * Select next menu: Press the [ M ] button.
11. * Return to normal operating mode: Press the [ M ] button, until "Ready" ap-
pears in the display.
Product,+,C
Code 9000
Code 0000
Change code
Code 0000