Schenck process Intecont Satus User Manual

Calling up the parameter menu
Call up the function distributor.
Scroll to PROGRAM in the lower part of the display and confirm.
Select the function ENTER PAR.
Enter the password 07734
‘Block A’ will be displayed for approx. 2 seconds followed by the title of the first parameter
block.
Return to the normal display.
The parameter menu may be recalled for approx. 2 minutes without needing to
reenter the password.
11.2 Preselecting the parameters
1. Block Character
Scrolling through blocks A, B ... and back.
The block character will be displayed briefly followed by the block title.
Selecting a block
The previously selected parameter will be displayed.
2. Parameter Number
The parameter name will be displayed briefly first followed by the block
character and the parameter number and value.
The parameter number will blink.
Scrolling through the parameter numbers within a block.
Scrolling through the parameter numbers, across all blocks (only
upwards).
Return to the block titles.
Return to normal operation.
11.2 Preselecting the parameters Parametrization
32 BV-H2346GB / 0833 Operating Manual INTECONT® Satus
© Schenck Process

Schenck process Intecont Satus Specifications

General

Brand	Schenck process
Model	Intecont Satus
Category	Measuring Instruments
Language	English