Schenck process Intecont Satus User Manual

11 Parametrization
11.1 General Information
Parameters are modifiable attributes or data with which the INTECONT is adapted to its
special weigh tasks.
Dimension and format of the displays
Limit values
Nominal and setup data etc.
Some parameters can be selected according to individual demands (e.g. display formats),
others must be taken from the data sheet of the scales’ mechanics.
All functions remain operational during entry of parameters.
However, only parameters which have no metrological influence should be altered during
operation, such as display options etc.
Preconfigured parameters:
All parameters are preconfigured.
Many preconfigured values are expedient recommendations and can often be retained.
The preconfigured values can be recalled with the sub-function ‘Load Preconfigured
Parameters’.
Identification symbol:
The parameters are arranged into functional blocks A, B,... and are described within the
blocks by
Name
Number 1, 2, 3 ..
and
Value°
Values which deviate from the preconfigured values are identified by a *before the
character.
There are 2 kinds of parameter:
Selectable parameters
One may be chosen from among a number of options, e.g. WARNING, ALARM.
Numerical Parameter
A numerical value must be entered, e.g. nominal feed rate.
Parametrization 11.1 General Information
INTECONT® Satus Operating Manual BV-H2346GB / 0833 31
© Schenck Process

Schenck process Intecont Satus Specifications

General

Brand	Schenck process
Model	Intecont Satus
Category	Measuring Instruments
Language	English