Contact outputs
Aggregated alarm will remain on until a successful acknowledgement is made.
Min-Max outputs are independent of the event class and also function with
IGNORE.
Limit values are recorded for the duration of an event but only
when the scales are on.
7.4 Function distributor
Further functions and dialogues can be called up using the function distributor.
Call up the function distributor.
The previously selected function will be displayed if no event is
pending.
Navigating the function distributor
Initiate function
Return to the normal display, or abort a function.
Acknowl. event E
Cancel counter 1
Service value/Normal display
Display events E
Display test
Program
Adjustment functions S
Read parameter
Enter parameter S
Load preconfigured parameter S
Set option S
TW: Taring S
CW: Weight control S
LB: Imp/Belt circuit S
Set time S
The ‘Program’ and ‘Adjustment functions’ call up further menus which can be scrolled
through using the cursor keys.
S= Adjustment functions which may only be accessed with a password.
The password is queried once the function has been called up.
E= Only if an event is pending.
‘Browsing’ through the function distributor does not restrict any scales-specific functions.
Operation 7.4 Function distributor
INTECONT® Satus Operating Manual BV-H2346GB / 0833 19
© Schenck Process
To Next Page
Loading...
