Schenck process Intecont Satus - Commissioning Flow Chart

2 Commissioning Flow Chart
Commissioning Flow Chart
INTECONT® Satus Operating Manual BV-H2346GB / 0833 3
© Schenck Process
vh234614.cdr
Setting Parameters
for Blocks A, B, C (15 Parameters)
Chapterl
3+4
Chapter
5 + 6.1
Chapter
10
Chapter
8
Chapter
13
Powering-up and
Awaiting System Start
Mechanical and
Electrical Installation
Execute Setup Programs
Belt Circuit
Taring
Set Time
Set Limit Values
for Parameter Block F (3 Parameters)
Set
Fieldbus Communication
for Blocks L, L + T, or L + U
Chapter
10
Fig. 1: Commissioning Flow Chart