Schenck process Intecont Satus - Parameter Entry Procedure; Loading Preconfigured Parameters

11.3 Parameter Entry
Perparing the entry.
Selectable parameter:
The value blinks.
The desired value can be scrolled into the display.
Numerical Parameter:
Characteristic: Numerical value in the display,
Enter the value.
Concluding the entry.
The subsequent parameter will be displayed.
Aborting the entry.
11.4 Load Preconfigured Parameters
Loading the factory defaults.
The function is protected by a password and a YES/NO query.
Important!
Any altered parameters and adjusted values will be erased.
PROGRAM function,
call up PRECONFIGURED PARAMETERS.
YES = 1
NO = 0
Confirm
preselection
Parametrization 11.4 Load Preconfigured Parameters
INTECONT® Satus Operating Manual BV-H2346GB / 0833 33
© Schenck Process