Safety and Functional Tester GLP2-i/e
During the test, test object and test leads must not be touched!
The safety measures required by law must be adhered to!
Schleich GmbH * D-58675 Hemer * 0049 / (0)2372 / 9498-0 * 0049 / (0)2372 / 9498-99 *
http://www.schleich.com * info@schleich.com 45
Cancel if no go
on: An additional process doesn’t give a result. However, it can interrupt a test process
with “no go”, if the entered inputs have not been activated after the waiting time has
elapsed.
off: The process is stopped until the programmed inputs have been activated.
To Next Page
Loading...