16
Open the bag and, with one person on either side,
grip the strap handle and underside of the unit to
lift and remove it from the base packaging.
Unlatch the unit door to open it and remove items
stored in the chamber. Check the contents. (See
Checking package contents, in this section.)
With the unit still on the floor, connect the power
cord. (See Electrical connections and power, in this
section.)
Connect the exhaust tubes. (See Connecting the
exhaust tubes, in this section.)
Place the loose ends of the tubes and power cord
over the top of the unit.
With one person on either side, grip the strap
handle and underside of the unit to lift it into
position.
Once in position, push the power cord and hoses
through the cut-outs in the cabinetry to make the
connections.
To Next Page
Loading...
