SEA SYSTEMS
INSTALLATION AND USE MANUAL
CONTROL PANEL and PREWIRED SYSTEM STK1
For Electric and Hydraulic Lifts
MSTK12-GB
Rev.01
30/12/05
SETRONIK1 Pagina 32 di 54
3.8.PROGRAMMING MAX FLOOR RE-LEVELLINGS, POSITION INDICATIONS.
DG0 DG1 DG2 DG3 DG4 DG5 DG6
1
0 6
TYPE OF POSITION INDICATIONS
00= Positional (one output for each position)
01= Denied BDC display (Relative to Main Floor)
02= Absolute Gray code display
03= Relative Gray Code display (Relative to Main
Floor)
04= Binary Code display
MAX. NUMBER OF FLOOR RE-LEVELLINGS
Once the lift has reached the value set, the lift goes
out of service (Only for hydraulic lifts)
If set on 00, this function is not considered.
To Next Page
Loading...
