SEA SETRONIK1 - Safety Rules for Installation

SEA SYSTEMS
INSTALLATION AND USE MANUAL
CONTROL PANEL and PREWIRED SYSTEM STK1
For Electric and Hydraulic Lifts
MSTK12-GB
Rev.01
30/12/05
SETRONIK1 Pagina 8 di 54
2.2.SAFETY RULES
•The unit can only be installed by qualified and authorised personnel, who is liable for the
specific compliance to standards according to the technical best practice available.
•Before any cleaning or serve, cut the unit from the power supply by means of the
installation cut-out switch.
• Always wear the demanded personal protections (fig. 2.1),and more precisely:
- Cask.
- Gloves.
- Overall, closed at the wrist level.
- Protective shoes.
- Safety belts.
- Headphones.
Fig. 2.1 – Safety signalling
• Never wear loose objects and/or clothing (necklaces, watches, ties), avoid long hair.
• Never store cutting or pointed objects (screwdriver, scissors …) in the shirt pocket.
• Never tamper, wear or hide warning signs or labels. When wore and demanded,
immediately replace the.
• In order to lift heavy loads, always used suitable tools, thus avoiding any damage to the
spine cord depending on the unit manual handling.
2.3.GLOSSARY
NOTE
It provides personnel with specific and valuable information.
WARNING
It provides personnel with information which, when not complied with, can lead to
light people or installation damages
CAUTION
It provides personnel with information on a specific operation, which, if not taken
into account in compliance with safety regulations in force, can lead to possible
severe physical damages.