SEA SETRONIK1 User Manual

SEA SYSTEMS S.R.L
Control Panels, Push button panels and Prewired systems for lifts
Street San Carlo 13 - 20010 Bareggio - Milano - ITALY
Tel: +39 02 90 36 34 99 - Fax: +39 02 90 36 35 00
Internet: www.seasystems.it - e-mail: sea@seasystems.it
MSTK12-GB
Rev.01
30/12/05
INSTALLATION AND USE
MANUAL
Control Panel and Prewired system
SETRONIK1
For Electric and Hydraulic Lifts

SEA SETRONIK1 Specifications

General

Brand	SEA
Model	SETRONIK1
Category	Control Panel
Language	English

Summary

Installation Guide for SETRONIK1 System

General Installation Notes

Provides important safety, operating, and service instructions for installation.

Safety Rules for Installation

Outlines essential safety rules for personnel and equipment during installation.

Preliminary Operations Checklist

Details crucial checks and preparations before starting the installation process.

Control Panel Fixing and Connection

Instructions for securely mounting and connecting the control panel in the machine room.

Shaft Fixing and Connection Procedures

Steps for installing and connecting components within the lift shaft.

Shaft Line Branch Point Connections

Shaft Line Series Connections

Car Roof Fixing and Connection

Guide for attaching and wiring components on the lift car roof.

Junction Box and Flexible Cable Connections

Car Push Button and Door Operator Connection

Shaft Sensor Fixing for Hydraulic Lifts

Specifies how to fix and connect shaft sensors for hydraulic lifts using different bracket types.

Shaft Sensor Fixing for Electric Lifts

Guide for fixing and connecting shaft sensors for electric lifts with different bracket types.

Insulation Test Procedure

Details the procedure and table for performing insulation tests on the system components.

System Commissioning Steps

Steps to follow for the final commissioning and startup of the lift system.

Programming the SETRONIK1 System

Programmer Connection (STK2-PM)

Instructions for connecting the STK2-PM programmer to the STK1-B board.

Example of Programmer Usage

Setting Customer Secret Access Code

Parameter Storing Procedure

Lift, Operation, and Selector Programming

Programming Specific Floors

Operator Configuration

Max Re-levellings and Position Indications

Programming Speed, Stop Modes, and Door Functions

Overload Contact Configuration

Service Programming

Shaft Programming Settings

Timer Programming

Input Programming

Output Programming

Diagnosis and Status Monitoring

Lift Status Display

Failure and Malfunction Display/Cancellation

Procedures for viewing and clearing fault codes and malfunctions.

Machine Room Lift Operation Commands

LED Signalling Legend for Control Cards

Error Code Legend for Troubleshooting

Comprehensive list of error codes and their corresponding descriptions for troubleshooting.

Maintenance Procedures

Battery Replacement Guide

Shaft Sensor Maintenance

STK1-B Electronic Board Replacement

Detailed steps for safely replacing the STK1-B electronic board.

CS1 Safety Circuit Replacement

Procedures for replacing the CS1 safety circuit device.

Basic Troubleshooting Procedures

Alarmed Card Troubleshooting (All LEDs ON)

Troubleshooting steps for when the control card shows all LEDs illuminated.

Erroneous Shaft Sensor Readout

Guidance on resolving issues related to incorrect readings from shaft sensors.