What to do if the touchscreen display on Seca Medical Equipment is not reacting?
If the touchscreen display on your Seca Medical Equipment is not reacting, it could be due to the device being in an undefined state following implausible input. To resolve this, switch off the device by pressing and holding the on/off button for approximately 3 seconds, then switch the device back on.
What to do if the image on Seca 514 Medical Equipment touchscreen display is faulty?
If the image on the touchscreen display of your Seca Medical Equipment is faulty, the touchscreen display itself may be faulty. In this case, inform Seca service.
How to fix a Seca 514 device that will not switch on?
If your Seca Medical Equipment cannot be switched on, check whether power is being supplied. If the power supply is not the issue, the power pack may be faulty. In this case, replace the power pack with an original part.
Why is the touchscreen display dark on my Seca Medical Equipment?
If your Seca Medical Equipment's touchscreen display remains dark, it could be in standby mode. Try touching the touchscreen display, pressing the on/off button, or placing a load on the device. It's also possible that the device isn't switched on, so ensure it is. Another potential cause is no power supply, so check whether power is being supplied. If none of these steps work, the touchscreen display might be faulty, and you should inform Seca service.
What does ER16 message mean on Seca Medical Equipment and how to resolve it?
If the message ER16 appears on your Seca Medical Equipment, it indicates that natural vibration has been induced in the device, and the zero point could not be determined. To resolve this, restart the device and then restart the measurement.
What does the TEMP message on Seca Medical Equipment mean and how can I resolve it?
If your Seca Medical Equipment shows the message TEMP, it indicates that the ambient temperature is either too high or too low. Ensure the device is set up in an ambient temperature between +10 °C and +40 °C. Then, wait approximately 15 minutes for the device to adjust to the ambient temperature.
What to do if the STOP message appears on Seca 514 Medical Equipment?
If the message STOP appears on your Seca Medical Equipment, it means the maximum load has been exceeded. Remove the load from the device.
What does message ER12 mean on Seca 514 and how to fix it?
If the Seca Medical Equipment displays the message ER12, it means the device was switched on with too heavy a load. To fix this, remove the load from the device and then restart it.
What to do if the message ER11 appears on Seca 514?
If the message ER11 appears on your Seca Medical Equipment, it indicates that the device is overloaded either as a whole or in one corner. To resolve this, remove the load or distribute it evenly and then restart the device.
Why aren't results report being printed from Seca 514 Medical Equipment?
If the results report is not being printed, ensure the PC printer is switched on, the PC on which the Seca 115 PC software is installed has been switched on, and a link has been set up between the Seca 115 PC software and the PC printer.
General| Brand | Seca |
|---|---|
| Model | 514 |
| Category | Medical Equipment |
| Language | English |
Explains the primary purpose and application areas of the medical Body Composition Analyzer.
Details the device's capabilities, including weight, height, and bioimpedance measurements.
Lists conditions or situations where bioimpedance measurements should not be performed.
Provides essential safety guidelines for operating the device safely and preventing hazards.
Covers precautions against electric shock, injuries, infections, device damage, and result integrity.
Instructions for handling and storing the device's packaging.
Identifies and explains the device's physical controls, buttons, LEDs, and display symbols.
Details the meaning of various color symbols and control elements on the device interface.
Outlines the hierarchical structure of the device's menus and how to navigate through them.
Explains the markings and labels found on the device and its type plate.
Describes the symbols and information found on the product packaging.
Lists all included components and guides through the initial power connection and setup.
Covers device placement, network connection via Ethernet or wireless, and PC software integration.
Explains how to use a seca 360° stadiometer for height measurement wirelessly.
Details touchscreen operation, switching on/off, selecting functions, and data entry methods.
Guides through the typical measuring process, including assigning patients and saving results.
Explains the device's automatic standby feature and the procedure for safely switching it off.
Guides on adapting default module selection for bioimpedance analysis.
Covers setting up user accounts, PINs, passwords, and accessing the Administrator menu.
Details configuring units, regional settings, date/time, and network parameters.
Covers adjusting display brightness/volume and setting up Ethernet and wireless networks.
Step-by-step guide to integrate the device into an Ethernet network.
Instructions for setting up the seca CLS network for PC communication.
Detailed steps for setting up a seca 360° wireless network connection.
Explains how to view connected wireless devices and their status.
Information on viewing software versions, scale logbook, and making system settings.
Procedure for exporting system log files for analysis and troubleshooting.
Steps for changing the administrator PIN and calibrating the touchscreen display.
Guide on how to reset the device to its original factory default settings.
Details on using service functions like software updates and exporting/importing settings.
Addresses problems related to power, dark/unresponsive displays, and initial weighing.
Solutions for bioimpedance-specific errors, module activation, and result deviations.
Troubleshoots issues with setting up device-to-PC communication and patient file access.
Solves problems related to print function availability and report generation.
Provides technical details about the seca 360° wireless network capabilities.
Details compatibility between device and PC software versions and recent modifications.
To Next Page
