Secutron MR-2306-DDR User Manual

65
Configuration
11.5 Set Time (Command-Menu)
Note: Refer to section 11.2.1 on page 55 for detailed instructions on making menu
selections.
Command Menu/Set Time
11.5.1 Daylight saving
[X] DISABLE ->Default
[ ] ENABLE
Use this function to enable
daylight savings time.
Command Menu/Time Clock
11.5.2 Time Clock
Default
00:00 MON 2000-01-01
Use this menu to set the time
and date. Use the left and right
arrow buttons to move the
cursor to the desired location in
the display and use the up and
down arrow buttons to increase
or decrease the values. Press
the ENTER button to accept the
changes and the CANCEL
button to ignore the changes.
Note: time is in 24 hour format
Command Menu/Time Clock
11.5.3 Compensation
Once the compensation value is entered the
display will be:
Compensation value can
range from -15 to +15
seconds.
Use the up and down arrow
buttons to select the daily
compensation value and press
ENTER. For a fast clock adjust
negatively. For a slow clock
adjust positively. For example, for
a clock which runs 5 minutes a
month (based on 30 days) fast,
select -10 seconds.
i
1 Daylight Save
2 Time Clock
3 Compensation
Daylight Saving
[X] DISABLE
HH:MM WKD YYYY-MM-DD
00:00 MON 2000-01-01
Daily Compensation:
0
Daily Compensation:
Panel Config Updated

Secutron MR-2306-DDR Specifications

General

Brand	Secutron
Model	MR-2306-DDR
Category	Control Panel
Language	English