79
Configuration
11.15 Aux. Disconnect (Command-Menu)
11.16 Exit (Command-Menu)
Pressing “ENTER” after selecting “Exit” from the main menu will return the panel to normal
LCD operation.
11.16.1Zone messages
Point annunciation is indicated on the LCD display. There are no separate queues for
“TROUBLE”, “ALARM”, “SUPERVISORY” and “MONITOR”; instead there is only one queue
that indicates all the events. The respective TROUBLE, ALARM and SUPVISORY LEDs will
be flashing if at least one of the given types is in the queue.
Scroll through the events by using the “UP” and “DOWN” keys. If you need more information
about the displayed event, press the “INFO” key.
Use the up or down keys to change from YES to NO.
This selection work like a switch. If Yes this command
disconnects the auxiliary alarm relay and associated
relays as long as the Aux disc feature has be enabled.
Note: Refer to section 11.2.1 on page 55 for detailed instructions on making menu
selections.
Note: For monitor events, the display shows the word BUILDING.
To Next Page
Loading...
Need help?
General
