Sena 10C User Manual

10C
13
English
6. Insert the speaker connector into the speaker port to connect it
to the main unit.
7. Close the cover of the speaker cable to lock the cable to the port.
The speaker cable is now xed to the main unit.
Note:
After connecting the microphone and speaker cable, store any excess
cable behind the internal padding of helmet to prevent wires from becoming
damaged.
CAUTION:
When you remove the headset, make sure that you first detach the speaker
cable from the main unit. Then, it is safe to remove the main unit from the
clamp unit.

Sena 10C Specifications

General

Intercom Range	Up to 1.6 km (1 mile) in open terrain
Operating Temperature	-10°C to 55°C (14°F to 131°F)
Video Resolution	1080p: 30fps 720p: 60fps
Video Recording Time	2 hours
Card Support	MicroSD card up to 32 GB
Bluetooth Profiles	HFP, HSP, A2DP, AVRCP