Sena 10C - Page 30

10C
30
4. After selecting the last number redial menu, you will hear a voice
prompt, “Last number redial”. Then, to redial the last phone call
number, tap the Phone Button.
5. To call one of the speed dials, rotate the Jog Dial clockwise or
counter clockwise to navigate between the menus until you hear
a voice prompt, “Speed dial (#)”. Then, tap the Phone Button.
6. If you want to exit the speed dial immediately, rotate the Jog
Dial until you hear a voice prompt, “Cancel”, and tap the Phone
Button or the Jog Dial. If you do not press any button within
15 seconds, the 10C will exit the voice speed dial menu and go
back to stand-by mode.
Note:
1. Make sure that you connect the mobile phone and the headset to use the
speed dial function.
2. You need to assign speed dial numbers before using the speed dial
(please refer to section 15.1.1, “Assigning Speed Dial”).
Answer Tap Phone Button or Tap Jog Dial or Say “Hello”
End Tap Phone Button or Press Jog Dial for 2”
Reject Press Jog Dial for 2”
Transfer Press Phone Button for 2”
Call Use phone keypad
Speed Dial Double tap Phone Button
Voice Dial Tap Phone Button
Mobile Phone Call Button Operations