Sena 10C User Manual

10C
55
English
15.2.1 Photo Mode
You can select the photo mode to be either single shot or burst shot.
Single shot takes a single photo while burst shot takes 5 photos. When
you hear the voice prompt, “Photo mode setting”, tap the Phone
Button to select single shot mode or burst shot mode.
Voice Prompt
“Photo mode setting”
Factory Default Single Shot
Select Mode
Tap the Phone Button
(Single shot mode, Burst shot
mode)
15.2.2 Video Mode
You can select the video mode to be video mode, timelapse mode, or
loop recording mode. Video mode records a normal video. Timelapse
mode records series of photos at timed intervals and makes it into a
video. Loop recording mode constantly records videos at timed
intervals, replacing old video les when memory is full.
Voice Prompt
“Video mode setting”
Factory Default Video Mode
Select Mode
Tap the Phone Button
(Video mode, Timelapse mode,
Loop recording mode)
15.2.3 Video Resolution
You can select the video resolution to be 1080p/30fps, 720p/60fps, or
720p/30fps. When you hear the voice prompt, “Video resolution
setting”, tap the Phone Button to select 1080p/30fps, 720p/60fps, or
720/30fps.
Voice Prompt
“Video resolution setting”
Factory Default 1080p/30fps
Select Mode
Tap the Phone Button
(1080p/30fps, 720p/60fps,
720p/30fps)
15.2.4 Timelapse Interval
You can select the timelapse interval to be either 1 second or 10
seconds. When you hear the voice prompt, “Timelapse interval
setting”, tap the Phone Button to select shot per 1 sec or per 10 secs.
Voice Prompt
“Timelapse interval setting”
Factory Default 1 sec
Select Mode
Tap the Phone Button
(per 1 sec, per 10 secs)

Sena 10C Specifications

General

Intercom Range	Up to 1.6 km (1 mile) in open terrain
Operating Temperature	-10°C to 55°C (14°F to 131°F)
Video Resolution	1080p: 30fps 720p: 60fps
Video Recording Time	2 hours
Card Support	MicroSD card up to 32 GB
Bluetooth Profiles	HFP, HSP, A2DP, AVRCP