Appendix
A.1 Measured variables
SENTRON PAC4200
System Manual, 09/2009, A5E02316180B-02
205
Name Abbrev.
DE + IEC
Abbrev.
EN + UL
Unit Dis-
play
LIM
SOURCE
Cos φ c Cosφ
L3
Disp. PF
c
– 10.0 COSφ c
Power factor of the fundamental in phase conductor c (inductive or capacitive)
Maximum cos φ c Cosφ
L3 max
Disp. PF
c max
– 10.1
Maximum value of the power factor of the fundamental in phase conductor c (inductive or capacitive)
Minimum cos φ c Cosφ
L3 min
Disp. PF
c min
– 10.2
Minimum value of the power factor of the fundamental in phase conductor c (inductive or capacitive)
Power Factor a |PF
L1
| |PF
a
| – 8.0 PF a
Power factor (arithmetic) in phase a
Maximum power factor a |PF
L1
| max |PF
a
| max – 8.1
Maximum value of the power factor (arithmetic) in phase conductor a
Minimum power factor a |PF
L1
| min |PF
a
| min – 8.2
Minimum value of the power factor (arithmetic) in phase conductor a
Power factor b |PF
L2
| |PF
b
| – 8.0 PF b
Power factor (arithmetic) in phase b
Maximum power factor b |PF
L2
| max |PF
b
| max – 8.1
Maximum value of the power factor (arithmetic) in phase conductor b
Minimum power factor b |PF
L2
| min |PF
b
| min – 8.2
Minimum value of the power factor (arithmetic) in phase conductor b
Power factor c |PF
L3
| |PF
c
| – 8.0 PF c
Power factor (arithmetic) in phase c
Maximum power factor c |PF
L3
| max |PF
c
| max – 8.1
Maximum value of the power factor (arithmetic) in phase conductor c
Minimum power factor c |PF
L3
| min |PF
c
| min – 8.2
Minimum value of the power factor (arithmetic) in phase conductor c
Total Power Factor PF PF – 9.0 TOTAL PF
Total power factor
Maximum total power factor PF
max
PF
max
– 9.1
Maximum total power factor
Minimum total power factor PF
min
PF
min
– 9.2
Minimum total power factor
Line Frequency f f Hz 11.0 FREQ.
Instantaneous value of the line frequency
Maximum line frequency f
max
f
max
Hz 11.1
Maximum value of the line frequency
Minimum line frequency f
min
f
min
Hz 11.2
Minimum value of the line frequency
Displacement Angle a φ
L1
φ
a
° 14.1 φ a
Displacement angle between voltage and current for the fundamental in phase conductor a
Maximum displacement angle a φ
L1 max
φ
a max
° 10.4
Maximum displacement angle between voltage and current for the fundamental in phase conductor a