SENTRON PAC4200 - Page 59

Description
3.16 Events
SENTRON PAC4200
System Manual, 09/2009, A5E02316180B-02
59
Event Event
class
Standard
warning
level
Reason Remedy
UNIV.=0 Control Information The universal counters have
been reset.
Value 00000000
Slot xx interface
-
PASSWORD Control Information Password protection is activated.
Slot xx interface
-
PASSWORD Control Information The password has been
changed
Slot xx interface
-
FIRMWARE Control Information The firmware has been updated.
Version PAC4200 Vx.xx
Slot xx interface
-
1) Counter = active energy import tariff 1 / 2 kWh, reactive energy export tariff 1 / 2 kVAh, apparent energy tariff 1 / 2 kVAh
Acknowledging an event
If an event is set to "acknowledgable" in the software, a popup window for this event opens
on the device. Acknowledge the event in the popup window with "OK". Acknowledgment
closes the popup window. The event is logged in the event memory.
Settings in the SENTRON software
You can make the following settings in the software:
● Change the warning level for an event
● Acknowledge an event
● Entry of an event in the event memory
● Output of the event at the digital output
● Order of appearance on the display
See also
Safety notes (Page 17)