154 丨 Charging and Refueling
• In low-temperature environments, the charging
port cover may freeze, preventing it from popping
out. In such cases, thawing treatment should be
performed first.
• In low-temperature environments, the power
battery may experience a decrease in charging
efficiency or an inability to charge. In such cases,
when you connect the charging equipment to the
vehicle's charging port for charging, the system
will automatically heat the power battery to an
appropriate temperature for charging to proceed
automatically.
Charging Reservation
The reservation charging function can help you use
electricity reasonably. If electricity costs are low during a
certain time period, you can schedule the vehicle to charge
during that time.
1. Stabilize the vehicle and shift the gear position to P.
2. On the central control screen, go to vehicle setting >
energy management, click the switch, and set the
reservation charging time.
• In the reservation charging time interface, you can
enable the option "If the charging limit is not
reached by the end time, continue charging."
• If the option "If the charging limit is not reached by
the end time, continue charging" is selected, and
the actual plug-in charging time exceeds the
scheduled start time, the charging will not start
after inserting the charging gun. In this case, you
need to disable the reservation charging function
or reset the scheduled start time.
* The image is for reference only; please refer to the actual
product
3. You can set the charging limit on the central control
screen (refer to page 146).
4. On the central control screen, go to Vehicle Setting >
Common Controls, click the switch to open the
charging port cover.
* The image is for reference only; please refer to the actual
product
5. Remove the seal cover from the slow charging port.
* The image is for reference only; please refer to the actual
product
6. Press the button on the charging gun to remove the
charging gun protective cover.
* The image is for reference only; please refer to the actual
product
7. Insert the slow-charging charging gun correctly into
the vehicle's slow-charging charging port, and hear a
"click" sound to indicate that the charging gun is
inserted in place.
8. Lock the charging gun and start the reservation
charging function.
9. If you need to stop charging midway, go to vehicle
setting > energy management on the central control
screen, click the switch, and end charging.
To Next Page
Loading...
