EasyManua.ls Logo

SERES 5 - Page 153

Default Icon
211 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Charging and Refueling 153
1
2
3
4
5
6
7
8
9
10
11
12
13
Home portable charging gun charging
You can charge the vehicle using an AC charging station
(slow charging) method.
Charging with a home portable charging gun
1. Bring the vehicle to a complete stop and shift the
gear position to Parking (P Gear).
2. On the central control screen, go to Vehicle Setting >
Common Controls, click the switch to open the
charging port cover.
* The image is for reference only; please refer to the actual
product
3. Remove the seal cover from the slow charging port.
* The image is for reference only; please refer to the actual
product
4. Press the button on the charging gun to remove the
charging gun protective cover.
5. Insert the charging gun correctly into the vehicle's
charging port, and hear a "click" sound indicating that
the charging gun is in place.
* The image is for reference only; please refer to the actual
product
6. Connect the three-pin plug to a standard 220V
household power outlet, and the vehicle will start
charging automatically.
7. You can set charging limits through the central
control screen.
8. If you need to stop charging midway, go to Vehicle
Setting > Energy Management on the central control
screen, click the switch to end the charging process.
* The image is for reference only; please refer to the actual
product
9. After charging is complete, press the button on the
charging gun and remove the charging gun.
Tip
If the above methods cannot unplug the charging gun,
you can use the slow charging emergency pull rope to
unlock the charging gun (refer to page 155).
10. Unplug the three-pin plug from the household 220V
power outlet.
11. Close the seal cover of the slow charging port.
12. Close the charging port cover and press its rear part
until the charging port cover plate locks.
13. Place the charging equipment back in its original
position.
Warning
According to applicable local and national
standards, use a 220V AC socket to charge the
power battery.
Do not use power outlets that are obviously worn
or damaged.
To avoid damaging the Vehicle paint, place the
protective cover of the charging gun in a suitable
position where it does not touch the vehicle.
Before charging, ensure that the three-pin plug is
inserted into a 220V power outlet with a grounded
three-hole socket.
Ensure that the charging cable or plug is not
exposed to direct sunlight. If exposed, the
overheating protection in the control unit or plug
may limit or interrupt charging.
During charging, do not unplug the charging cable
from the power outlet.
Tip
Home portable charging guns need to be
purchased separately; for details, please consult
the dealer.

Table of Contents

Related product manuals