SICK FLOWSIC600-XT

Important Information
FLOWSIC600-XT · Service Manual · 8019179/V0-2/2016-03 · © SICK Engineering GmbH 11
Subject to change without notice
1.2.5 Hazard through heavy loads
The FLOWSIC600-XT measuring system must be attached securely to the carrying structure
when being transported and installed.
▸ Only use lifting gear and equipment (e.g. lifting straps) suitable for the weight to be
lifted. Maximum load information can be found on the type plate of the lifting gear.
NOTICE:
The lifting lugs are designed for transporting the measuring device only.
Do not lift or transport the FLOWSIC600-XT with additional loads using these
lugs.