SICK FLOWSIC600-XT - Software and Configuration

Repairs
FLOWSIC600-XT · Service Manual · 8019179/V0-2/2016-03 · © SICK Engineering GmbH 23
Subject to change without notice
3.3 Tools required
● SW 3 Allen key
● SW 3 Allen key
● SW 5 Allen key
● SW 4 socket wrench
● Phillips screwdriver, size 1
● Slot screwdriver, size 2 (blade width 3 mm)
● Slot screwdriver, size 3 (blade width 6 mm)
● Pointed pliers
● Snap ring pliers
● Sensor puller (Part No. 7041772)
● Coax connection tool (Part No. 4047938)
● SW 22 torque wrench, setting range up to 10 Nm)
● Adjustable wrench (8")
● Wrench, 19 mm