Operating Instructions
LMS500 Product Family
Mounting
8013796/UL20/2010-09-27 © SICK AG · Division Auto Ident · Germany · Subject to change without notice 39
Chapter 4
4 Mounting
Do not open the housing of the LMS. If the housing is opened, any warranty claims against
SICK AG will be rendered void.
4.1 Overview of the mounting steps
• select a mounting location for the LMS
• mounting and adjusting the LMS
4.2 Preparations for mounting
4.2.1 Components to be mounted
• an LMS, weight approx. 3.7 kg (8.15 lb)
4.2.2 Material and accessories necessary
• mounting kit or mounting kits with mounting material (not in the delivery)
or
• weather protection hood with mounting kit (not in the delivery)
or
• as an alternative if a fixing bracket is provided by the user
– stable mounting bracket that provides adjustable alignment of the LMS in the X and
Y axis
– 4 M6 screws for the LMS, screw length dependent on the wall thickness of the
mounting bracket used
4.2.3 Necessary tools
• 4 M6 screws for mounting the SICK fixing bracket on the support, screw length as a
function of the wall thickness of the support
• tool set
4.2.4 Select mounting location
Mount the LMS such that it is not exposed to direct sunlight (if necessary fit canopy). In this
way an inadmissible increase in the temperature inside the system is avoided.
Avoid installing with view of glass or stainless steel surfaces.
To Next Page
Loading...
Need help?
General
