SICK LMS500 Series User Manual

Operating Instructions
LMS500 Product Family
Mounting
8013796/UL20/2010-09-27 © SICK AG · Division Auto Ident · Germany · Subject to change without notice 45
Chapter 4
4.3.6 Using multiple LMS laser measurement systems
Risk of interference on the LMS!
Sources with a wavelength of 905 nm may cause interference if they act directly on the
LMS.
The LMS is so designed that mutual interference between several laser measurement
systems is unlikely. To completely exclude erroneous switching, we recommend mounting
the laser measurement systems as shown in the following examples.
Use mounting kits 1 to 3 to adjust the laser measurement systems to different angles.
Correct placement of several LMS
Illustration of the LMS500 have to been inserted on the following figures
Arrange or shield several LMS such that the laser beam cannot be received by a different
LMS.
Fig. 28: Placement of two LMS opposed to each other
Fig. 29: Crosswise placement of two LMS
Fig. 30: Placement of two LMS with parallel offset

SICK LMS500 Series Specifications

General

Brand	SICK
Model	LMS500 Series
Category	Measuring Instruments
Language	English