Figure 45: Workflow step Data collection
9.1.4 Image handling controls
Use the image handling controls to manipulate regions and perspective when viewing
images. As an alternative to the buttons, you can use a mouse with a scroll wheel, as
described below.
Button Name Description
Select Click and drag to change the size and position of the image.
Shortcut command: Ctrl+Q.
Move Click and drag to move the image.
Shortcut command: Ctrl+W.
Shift+ press and hold the mouse scroll wheel.
Rotate Click and drag to rotate the image.
Shortcut command: Ctrl+E.
Press and hold the mouse scroll wheel.
Zoom Click and drag upwards to zoom in and downwards to zoom out.
Shortcut command: Ctrl+R.
Rotate the mouse scroll wheel.
3D navigation control
Use the 3D navigation control in the lower left corner of the image viewer to switch
between different viewing angles:
•
Click an arrowhead (X, Y or Z) to view a 2D projection of the object.
•
Click the same arrowhead twice to flip the 2D projection (for example, to switch
between the top and bottom view for the Z-axis).
•
Press Home to restore the original viewing position.
9 OPERATION
54
O P E R A T I N G I N S T R U C T I O N S | Ranger3 8020774/1D7Q/2022-03 | SICK
Subject to change without notice
To Next Page
Loading...
