2.5 Cybersecurity
To protect against cybersecurity threats, it is necessary to continuously monitor and
maintain a comprehensive and holistic cybersecurity concept. A suitable concept com‐
prises organizational, technical, procedural, electronic, and physical levels of defense
and provides suitable measures for different types of risks. SICK's products and solu‐
tions must be viewed as a component of this concept.
Information on Cybersecurity can be found at: www.sick.com/psirt .
As the device complies with the GigE Vision®/GenICam™ standard, please note the
following:
•
The device does not support operating entity authentication. Anyone who can
connect to the device over Ethernet can perform all operations (firmware update,
reboot and configuration), without entering credentials such as passwords.
•
All communication (images, configuration, logs) between the device and the PC is
transmitted unencrypted using the UDP protocol.
•
The device must be upgraded to the most recent firmware to get security updates.
•
The GigE Vision® device discovery is done using UDP port 3956 and further
communication is done using dynamic UDP ports.
•
When connecting a device, it must be placed on a private network where access
control is handled by, e.g., separate firewalls.
2.6 Requirements for skilled persons and operating personnel
WARNING
Risk of injury due to insufficient training.
Improper handling of the device may result in considerable personal injury and material
damage.
■
All work must only ever be carried out by the stipulated persons.
The following qualifications are required for various activities:
Table 1: Activities and technical requirements
Activities Qualification
Mounting, maintenance
■
Basic practical technical training
■
Knowledge of the current safety regulations in the workplace
Electrical installation,
device replacement
■
Practical electrical training
■
Knowledge of current electrical safety regulations
■
Knowledge of the operation and control of the devices in their
particular application
Commissioning, configura‐
tion
■
Basic knowledge of the computer operating system used
■
Basic knowledge of the design and setup of the described
connections and interfaces
■
Basic knowledge of data transmission
■
Knowledge of the programming of image-processing systems
and network components
Operation of the device for
the particular application
■
Knowledge of the operation and control of the devices in their
particular application
■
Knowledge of the software and hardware environment for the
particular application
SAFETY INFORMATION 2
8020774/1D7Q/2022-03 | SICK O P E R A T I N G I N S T R U C T I O N S | Ranger3
9
Subject to change without notice
To Next Page
Loading...
