Guide for the SINUMERIK 840D sl machine configuring
Manual, 07/2006 Edition, 6FC5397-6CP10-0BA0
A-1
A ESD Notes
A
Caution
Electrostatic sensitive devices (ESD) are single components, integrated circuits or devices
that can be damaged by electrostatic fields or electrostatic discharges.
Regulations for the ESD handling:
During the handling of electronic components, pay attention to the grounding of the person,
workplace and packaging!
Electronic components may be touched by persons only when
• these persons are grounded using an ESD bracelet, or
• these persons in ESD areas with a conducting floor wear ESD shoes or ESD grounding
straps.
Electronic components should be touched only when this is unavoidable. The touching is
permitted only on the front panel or on the circuit board edge.
Electronic components must not be brought into contact with plastics or clothing made of
artificial fibers.
Electronic components may only be placed on conducting surfaces (table with ESD coating,
conducting ESD foamed material, ESD packing bag, ESD transport container).
Electronic components may not be placed near display units, monitors or televisions
(minimum distance from the screen > 10 cm).
Measurements may be made on electronic components when the measuring unit is
grounded (e.g. with a protective conductor) or prior to measuring with a potential-free
measuring unit, the measuring head is briefly discharged (e.g. by touching a bare metal
housing).
To Next Page
Loading...
Need help?
General
