Activate/Deactivate Drive System
9.2 Drive Group with Several Axes
Guide for the SINUMERIK 840D sl machine configuring
9-2 Manual, 07/2006 Edition, 6FC5397-6CP10-0BA0
9.2 9.2 Drive Group with Several Axes
The Motor Module is controlled using the -X21, -X22 terminal block and using DRIVE-CLiQ
at the -X200/201/202/203 terminal block. The detailed function description for the individual
signals and control/status words is contained in the SINAMICS S Parameter Manual.
To enable the Motor Module, the "infeed ready" signal must be connected from the Line
Module.
The following function diagrams show how the individual signals interact.
To Next Page
Loading...
Need help?
General
