Preface
Guide for the SINUMERIK 840D sl machine configuring
iv Manual, 07/2006 Edition, 6FC5397-6CP10-0BA0
Standard version
The accompanying documentation also mentions components that have not been released
for use with SINUMERIK 840D sl. The NC61 catalog is binding for the permitted
combinations.
Technical Support
If you have any questions, please contact our hotline:
Europe / Africa Asia / Australia America
Phone +49 180 5050 222 +86 1064 719 990 +1 423 262 2522
Fax +49 180 5050 223 +86 1064 747 474 +1 423 262 2289
Internet http://www.siemens.de/automation/support-request
E-mail mailto:adsupport@siemens.com
Note
Country-specific telephone numbers for technical support are provided under the following
Internet address:
http://www.siemens.com/automation/service&support
Questions about the Manual
If you have any queries (suggestions, corrections) in relation to this documentation, please
fax or e-mail us:
Fax: +49 (0) 9131 / 98 - 63315
E-mail: mailto:motioncontrol.docu@siemens.com
Fax form: See the reply form at the end of this publication
SINUMERIK Internet address
http://www.siemens.com/sinumerik
SINAMICS Internet address
http://www.siemens.com/sinamics
To Next Page
Loading...
Need help?
General
