Siemens SCALANCE X-400 Configuration Manual

Configuration using Web Based Management and Command Line Interface
4.5 The Switch menu
SCALANCE X-300 / X-400
Configuration Manual, 10/2014, C79000-G8976-C187-22
221
Overview
The content of this page depends on your device.
Figure 4-94 X-300 QoS Configuration
DSCP Mapping
Enables/disables DSCP to Queue Mapping
The following settings exist only for X-300 IE switches:
Broadcast Priority
Specify the priority with which broadcast frames are sent.
Agent Priority
Specify the priority with which agent frames are sent.
Scheduling Mode
● Strict Queueing
As long as there are frames with high priority in the queue, only these high-priority frames
are processed.
● Weighted Fair Queueing (SCALANCE X-300 only)
Even if there are frames with high priority in the queue, frames with a lower priority will be
processed occasionally.

Siemens SCALANCE X-400 Specifications

General

Brand	Siemens
Model	SCALANCE X-400
Category	Switch
Language	English