Siemens SCALANCE X-400 Configuration Manual

Configuration using Web Based Management and Command Line Interface
4.2 The System menu
SCALANCE X-300 / X-400
42 Configuration Manual, 10/2014, C79000-G8976-C187-22
System Location
Enter a location for the device in this box, for example a room number.
System Name
Enter a description of the device in this box.
Syntax of the Command Line Interface
Table 4- 2 System Configuration - CLI\SYSTEM>
Command
Description
Comment
syscon [string]
Sets/displays the syscontact MIB variable.
Administrator only.
sysloc [string]
Sets/displays the syslocation MIB variable.
Administrator only.
sysname [string]
Sets/displays the sysname MIB variable.
Administrator only.
4.2.2
System Identification & Maintenance (I&M)
System Identification & Maintenance
The following screen contains information on device-specific vendor and maintenance data
such as the order number, serial number, version numbers etc.
Figure 4-6 System Identification & Maintenance

Siemens SCALANCE X-400 Specifications

General

Brand	Siemens
Model	SCALANCE X-400
Category	Switch
Language	English