Siemens SCALANCE X-400 - Page 253

Configuration using Web Based Management and Command Line Interface
4.5 The Switch menu
SCALANCE X-300 / X-400
Configuration Manual, 10/2014, C79000-G8976-C187-22
253
Current
(read only)
The current with which a device connected to this port is supplied.
Rx Power
(read only)
The received power of the port.
Tx Power
(read only)
The transmit power of the port.
Syntax of the Command Line Interface
Table 4- 79 SFPDIAGNOSTIC - CLI\SWITCH\PORTDIAG\FMDIAG>
Command
Description
Comment
details [port]
Tests the specified port.
Administrator only.