Configuration using Web Based Management and Command Line Interface
4.7 The Router menu (SCALANCE X414-3E)
SCALANCE X-300 / X-400
Configuration Manual, 10/2014, C79000-G8976-C187-22
297
Number of routing table calculations
Number of LSAs in the LSDB of this area
Number of reachable area border routers (ABR) within this area
Number of reachable autonomous system border routers (ASBR) in this area.
Creating a new OSPFv2 area
With the "New Entry" button in the "OSPFv2 Areas" dialog, you can create a new area.
Figure 4-137 OSPFv2 Area Configuration
Enter the ID of the area here.
The following area types exist:
● Standard
● Stub
● NSSA
Note
For the backbone area, the selected area type must be "Normal" and the area ID 0.0.0.0.
Note
The "Import Summary" check box is displayed only when the "Stub" area type was set.