PROFINET IO functionality
6.1 Configuring with PROFINET IO
SCALANCE X-300 / X-400
Configuration Manual, 10/2014, C79000-G8976-C187-22
327
2. Using the "Browse" function go to the supplied xml file (for example GSDML-Vx.x-
Siemens-002A-SCALANCE_X400-YYYYMMDD.xml - Y, M and D stand for the issue date
of the file).
Figure 6-3 HW Config PROFINET IO - inserting a SCALANCE switch
3. Then adopt the file using the "Install" function.
The IE switches are now included in the module catalog (refer to the module catalog in
the following figure).
To Next Page
Loading...
