Appendix D
D.1 Error messages of the SCALANCE X300 / X400
SCALANCE X-300 / X-400
380 Configuration Manual, 10/2014, C79000-G8976-C187-22
● Device is configured to ring <off | ARD | HRP client | MRP client | HRP manager | MRP
manager>.
● Standby function <master | slave>.
● Observer started.
● Observer stopped.
● Observer contacted Redundancy Manager <MAC address>.
● Standby is waiting for <partner | observer>.
● Standby <partner | observer> connected to <master | slave> <MAC address> <port
number>.
● Standby <partner | observer> lost connection to <master | slave> <MAC address> <port
number>.
● Port <port number> is isolated ring port.
● Port <port number> is static ring port.
● No SMTP connection to mail server.
Server IP address <IP address> TCP port <TCP port number>.
● No SMTP application found.
Server IP address <IP address> TCP port <TCP port number>.
● SMTP (E-Mail) connection aborted. Server IP address <IP address>.
● Unable to send message to syslog server. Please check syslog socket configuration.
● Connected to syslog server.
● SNMP: Authentification failure.
● R)STP: new root bridge detected.
● (R)STP: topology change detected.
● Unable to send E-Mail(s). Please check IP configuration.
● Unable to send trap(s). Please check IP configuration.
● Failure reply code <error code> from SMTP server.
● Restart requested.
● No C-PLUG found. Internal flash memory used.
● An empty C-PLUG was found.
● C-PLUG format request.
● A filled C-PLUG was found.
● A corrupted C-PLUG was found.
● C-PLUG removed at runtime.
● C-PLUG plugged in at runtime.
● RMON rising alarm occurred.
● RMON falling alarm occurred.
● Ring redundancy enabled.
To Next Page
Loading...
Need help?
General