Siemens SCALANCE X-400 Configuration Manual

Configuration using Web Based Management and Command Line Interface
4.2 The System menu
SCALANCE X-300 / X-400
50 Configuration Manual, 10/2014, C79000-G8976-C187-22
Download this file to all other IE switches you want to configure.
If individual settings are necessary for specific devices, these must be made online.
The stored configuration data is coded and, as a result, these files cannot be edited with a
text editor.
Syntax of the Command Line Interface
Table 4- 6 System Save & Load - CLI\SYSTEM\SAVELOAD>
Command
Description
Comment
server [<ip>[:port]] Specifies the IP address and, as an option,
the port of the TFTP server with which data
will be exchanged.
Administrator only.
Default value: 0.0.0.0
cfgname <string> Specifies the name of a file (maximum 32
characters) from which the configuration
data will be loaded or in which the configura-
tion data will be saved.
Administrator only.
cfgsave Saves the configuration data in a file on the
TFTP server.
Administrator only.
cfgload Loads the configuration data from a file on
the TFTP server.
Administrator only.
logname <string> Specifies the name of a file (maximum 32
characters) in which the log table is stored.
Administrator only.
logsave Saves the log table in a file on the TFTP
server.
Administrator only.
fwname <string> Specifies the name of a file (maximum 32
characters) from which the firmware is load-
ed.
Administrator only.
Default value: Not defined.
fwload
Loads the firmware from a file.
Administrator only.
fwsave Saves the firmware in a file on the TFTP
server.
Administrator only.
keyload
Loads the private SSL key from a file.
Administrator only.
certload Loads an SSL certificate from a file. Administrator only.

Siemens SCALANCE X-400 Specifications

General

Brand	Siemens
Model	SCALANCE X-400
Category	Switch
Language	English