Siemens SCALANCE X-400 Configuration Manual

Configuration using Web Based Management and Command Line Interface
4.3 The X-300/X-400 menu
SCALANCE X-300 / X-400
68 Configuration Manual, 10/2014, C79000-G8976-C187-22
●
Standby Status
The "Standby Status" display box shows the status of the standby ports:
– Active:
The standby ports of this device are active; in other words are enabled for frame
traffic.
– Passive:
The standby ports of this device are inactive; in other words are disabled for frame
traffic.
●
Standby Ports
The "Standby Ports" display box shows the standby ports.
"RM Observer Information" section
●
Observer Status
The "Observer Status" display box shows the current status of the observer:
– passive
The observer has not detected any errors.
– active
The observer has detected an errors.
– -
The observer function is disabled.
Syntax of the Command Line Interface
Table 4- 15 X414-3E Ring Redundancy - CLI\X-400\RING>
Command
Description
Comment
info Displays the current ring configuration of the IE
switch.
-

Siemens SCALANCE X-400 Specifications

General

Brand	Siemens
Model	SCALANCE X-400
Category	Switch
Language	English