Operator control
8.1 Device interface
SENTRON PAC4200
106 Manual, 09/2008, A5E02316180B-01
General key functions F1 F2 F3 F4
Reset the maximum or minimum value to the
instantaneous value
Scroll up in the selection list
Scroll down in the selection list
Go to the menu selection
Special key functions F1 F2 F3 F4
Display the displacement angle φ
Display the cosine of the displacement angle
φ
Display the graph values
Display the graph
Display the THD of the voltage between the
phase conductors
Display the THD of the voltage between the
phase and neutral conductors
Display additional information
Scroll to the left
Scroll to the right
Display the next additional information
See also
Operator input steps in the measured variable display (Page 112)
To Next Page
Loading...
